Carpet To Tile Trim
The carpet to tile trim Slim Z is a new slimline carpet z bar
The new slim design of our carpet to tile trim will give a sleek smart finish.
NOTE** Due to the narrow top part of this trim it may not work if you have a gap between your carpet and the hard floor or if the hard floor has not been finished in the correct position, we recommended either checking with your fitter or calling us to discuss this before ordering.
These solid metal carpet to tile trims are hand finished in 10 classic finishes to match your home perfectly
So If you want a high-end smart-looking trim to finish your carpet to hard floor transition, this is the trim for you
- The Choice of standard finishes is: Antique Brass, Antique Bronze, Brass, Satin Brass.
- Or Choose our specialised finishes: Brushed Chrome, Chrome, Pewter, Polished Nickel, Satin Nickel and Black
- Choice of length: 90cm (36″), 180 (71″) and 270cm (106″)
Once you have decided which finish and length you require, please make your selections from the drop-down menu above.
Fitting A Carpet To Tile Trim
If you have a large height difference to overcome, then this door bar is perfect for you.
All orders are supplied with 3mm plywood strips to raise the trim for use with thick underlay and help you get over height changes
Below is a rough guide to help you with height differences (before carpet and underlay are fitted)
- 05-10mm height difference before carpet and underlay are fitted: use trim no shims or plywood strips required
- 10-16mm height difference before carpet and underlay are fitted: use trim plus 1 or 2 plywood strips provided
- 16-22mm height difference before carpet and underlay are fitted: use trim plus 6mm shim and 1 or 2 plywood strips provided
- 19-25mm height difference before carpet and underlay are fitted: use trim plus 9mm shim and 1 or 2 plywood strips provided
- 25-28mm height difference before carpet and underlay are fitted: use trim plus 12mm shim and 1 or 2 plywood strips provided
- 28-31mm height difference before carpet and underlay are fitted: use trim plus 15mm shim and 1 or 2 plywood strips provided
Please visit the carpet easyshims page to order the shims separately
Ordering And Delivery
Spend £75 for free delivery
For orders under £75 our delivery charge is £9.98, this is due to the fact that we use thick boxes and tubes to secure your trims, we also attached a timber batten to the longer parcels to help prevent them from damage, these precautions result in a slightly higher shipping price.
Delivery is normally 3-5 working days, however it can take 7-10 working day during busy periods
If the delivery date is critical, please contact us for an estimated delivery date.
Care and Maintenance
Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.
Satin Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.
Antique Bronze
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.
Antique Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.
Pewter
Remove spills immediately to limit corrosion with white vinegar. Use a polishing cloth occasionally, such as HG copper shine cloth, available from most DIY stores. Avoid contact with floor coverings.
Chrome, Brushed Chrome, Satin Nickel, Polished Nickel and Black
No maintenance required.
Jocelyn H. (verified owner) –
Verified review - view original
Very fast delivery, well packaged, good quality trims and prices better than I found elsewhere. Thanks!
Clare G. (verified owner) –
Verified review - view original
Very helpful advice received from Matt
Gabriel N. (verified owner) –
Verified review - view original
Lovely trims, they look great and the fitter commented on their quality. Not the cheapest, but much stronger and nicer than other options. Highly recommended!