Carpet To Tile Transition Strip
For a glamorous carpet to tile transition strip, Quality Carpet Trims is here to help
Carpet to tile is a very common transition and our carpet ramp product has helped thousands of customers finish the job.
For use where you have a height difference between 21mm and 36mm between your hard floor and the subfloor under the carpet (for a height difference of under 21mm use the carpet to tile threshold)
When fitting carpet to tile transition strip, there is normally a large height difference to overcome, and this clever little trim does exactly that.
This high-end finish door bar is made from solid brass and is hand finished in 10 exquisite colours to match your home perfectly
So to finish the job in style, choose THIS carpet to tile transition strip above all others
Also use for:
- Carpet to laminate
- Carpet to engineered oak flooring
- Carpet to solid oak flooring
- Carpet to LVT
- Carpet to vinyl
Fitting
When fitting carpet to tile, nine times out of ten the tile will be higher, and in some cases quite a step can be the result, this clever ramp solves that problem
With the use of carpet shims on the higher transitions, you can accommodate height changes of up to 36mm depending on carpet thickness
Below is a list of examples depending on your height change, this is just a guide as carpets are different thicknesses, we have used an average carpet thickness of 9mm
You will need to adjust this depending on your carpet thickness, but you can use these examples to work out your own requirements
If your carpet is not 9mm, and you need help working out what you need, we would love to hear from you, we would be happy to work it out for you, please call 01383 669190 option 2
- 21mm height difference use: no shim required, 7mm gripper, 9mm carpet, 5mm threshold
- 22mm to 27mm height difference use: 6mm shim, 7mm gripper, 9mm carpet, 5mm threshold
- 28mm to 30mm height difference use: 9mm shim, 7mm gripper, 9mm carpet, 5mm threshold
- 31mm to 33mm height difference use: 12mm shim, 7mm gripper, 9mm carpet, 5mm threshold
- 34mm to 36mm height difference use: 15mm shim, 7mm gripper, 9mm carpet, 5mm threshold
You will need to order your Carpet Shim separately.
(If you have less than a 21mm height difference then use the Carpet to Tile Threshold)
The video below shows a detailed fitting of this trim to a wood floor, but this could also be ceramic tiles
For the example in this video, we had a height difference of 34mm using a 9mm carpet with the 15mm shim to overcome the problem
This trim is also great if your carpet has already been laid, as it can be retro fitted by simply sticking it to your tiled flooring.
Choice of standard finishes: Antique Brass, Antique Bronze, Brass, Satin Brass.
Choice of specialised finishes: Brushed Chrome, Chrome, Pewter, Polished Nickel and Satin Nickel and Black
Choice of length: 90cm (36″), 180 (71″) and 270cm (106″)
Size: Top 14mm, Slope 16mm & Total Width Fitted 31mm approx
Ordering And Delivery
Spend £75 for free delivery
For orders under £75 our delivery charge is £9.98, this is due to the fact that we use thick boxes and tubes to secure your trims, we also attached a timber batten to the longer parcels to help prevent them from damage, these precautions result in a slightly higher shipping price.
Delivery is normally 3-5 working days, however it can take 7-10 working day during busy periods
If the delivery date is critical, please contact us for an estimated delivery date.
Care and Maintenance
Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.
Satin Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.
Antique Bronze
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.
Antique Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.
Pewter
Remove spills immediately to limit corrosion with white vinegar. Use a polishing cloth occasionally, such as HG copper shine cloth, available from most DIY stores. Avoid contact with floor coverings.
Chrome, Brushed Chrome, Satin Nickel, Polished Nickel and Black
No maintenance required.