Laminate Floor Edging

Laminate Floor Edging

Are you tired of the beading and scotia for laminate floor edging? Perhaps you are looking for laminate flooring edging options?

Here at Quality Carpet Trims, we have an excellent laminate floor edging alternative for your home

Our solid brass, self-adhesive laminate floor edging strips are robust, stylish, discreet and very easy to fit

Available in 10 colours designed to complement your laminate floor edges.

They are also available in 5 sizes, which size you pick depends on the thickness of your laminate flooring and underlay and also how far out on to the laminate you wish to come.

Choose from 3 lengths, if you plan your room out well, you can have very little waste, for joins it’s best to butt factory edges together, but that’s not essential as cuts will butt together well

With all these options you will easily edge your laminate flooring, and it will look stunning, far better than the MDF beading which never really looks that great and snaps and cracks after short periods of time.

Now you can have a discreet hard wearing laminate floor edging which will last better and look fabulous

You can also use the trim to edge around a fireplace or along French doors, this will give you a matching finish throughout.

The pre-applied, very strong, self-adhesive tape is fitted on the face of the trim (see images) and is designed to be stuck to your skirting or patio doors, this allows for flooring expansion

These premier trims, laminate floor edging strips will ultimately give you a much superior finish when compared to plastic or aluminium trims and also beading or scotia

Fitting

All surfaces should be cleaned/degreased before adhesion.

Corners are best mitred, much like you would with a beading or scotia.

Make your cuts with a good quality hacksaw with a new blade.

Flooring Pro’s Fitting Tip

Place masking tape where you are going to cut, this will prevent the hacksaw blade slipping and scratching the trim, it will give you a far cleaner cut

• Our choice of standard finishes is Antique Brass, Antique Bronze, Brass, and Satin Brass.
• Or choose from our specialised finishes: Brushed Chrome, Chrome, Pewter, Polished Nickel, Satin Nickel, and Black
• Choice of length: 90cm (36″), 180 (71″) and 270cm (106″)
• Choice of Sizes: 14x4mm, 14×10.65mm, 25×11.15mm, 37.5×11.15mm, 25×23.65mm (see image above)

The video below is a nosing product, but it will give you a better idea of the colours available in the laminate floor edge

Ordering And Delivery

If you need advice as to which size is best for you please call us on 01383 669190 or email us at sales@qualitycarpettrims.co.uk, we are glad to help

Spend £75 for free delivery

For orders under £75, our delivery charge is £9.98, this is due to the fact that we use thick boxes and tubes to secure your trims, we also attached a timber batten to the longer parcels to help prevent them from damage, these precautions result in a slightly higher shipping price.

Delivery is normally 3-5 working days, however it can take 7-10 working days during busy periods

PLEASE NOTE THAT THE BLACK TRIM CAN TAKE LONGER TO PRODUCE DUE TO THE WAY IN WHICH THE COLOUR IS FINISHED

If the delivery date is critical, please contact us for an estimated delivery date.

Laminate Floor Edge Care and Maintenance

Brass

Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.

Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.

Satin Brass

Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.

Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.

Antique Bronze

Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.

Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.

Antique Brass

Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.

Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.

Pewter

Remove spills immediately to limit corrosion with white vinegar. Use a polishing cloth occasionally, such as HG copper shine cloth, available from most DIY stores. Avoid contact with floor coverings.

Chrome, Brushed Chrome, Satin Nickel, Polished Nickel and Black

No maintenance is required.