Stair Rods For Runners
Stair Rods For Runners will complete your staircase and give you the look you are after
More and more people are turning back the clock when it comes to this traditional method of stair carpet fitting
Why? Because using a stair runner and stair rods can you give you a classic yet modern look, and is a far better way of glamourising your home than a fully fitted carpet
These stock length stair rods are easy to order and easy to fit
In this range, we have four sizes to choose from
These 4 sizes have been designed around the most common stair runner sizes
- 76.5cm To fit runners up to 70cm wide (27.5 inches)
- 99.5cm To fit runners from 71cms to 89cms wide (27.9 inches to 35.03 inches)
- 126.5cm To fit runners from 90cms to 120cms wide (35.4 inches to 47.2 inches)
- 156.5cm To fit runners from 121cms to 150cm wide (47.6 inches to 59 inches)
There are 7 great colours to choose from, Antique, Black, Brass, Bronze, Chrome, Pewter and Satin Nickel. 7 colours designed to complement your stair runner and ultimately your home perfectly
This is a 9mm hollow stair rod, the brackets will accommodate a carpet and underlay thickness of up to 14mm
Stair Rods For Runners Fitting
If required, these stair rods can be cut to your exact length on site. The cut end will be hidden inside the bracket, so there is no need to worry about the cut line
In many cases there will be no need to cut the rods down, but if you do need to cut them, a good quality hack saw will easily handle the job
The Stair Rods For Runners have finials which are pre-fitted to the brackets to save time. The rod simply slides in to the brackets on either side, making these stair rods the perfect choice when retro fitting to an existing carpet runner
The brackets are supplied with number 6 screws. You must drill a pilot hole before fixing the brackets to the stair. For softwood create a 2.5mm pilot hole and for hardwood create a 3mm hole. Remember to set your power drill on a low torque setting to avoid breaking the screws.
Fit one bracket to the tread and riser then, if need be, cut the rod to size and put in place. Now fit the second bracket.
We recommend using a damp cloth to keep the rods clean. Any household cleaners used to clean the wood and paint work of the staircase should be applied to the cloth and not directly onto the surface of the stair, because over spray can cause a speckled tarnish on the rods.
If any liquids are inadvertently spilt on the stair rods they should be cleaned immediately with a damp cloth and dried with a clean cloth.
To sum up, these stair rods are well priced at a fraction of the cost of some stair rods, they are easy to order and easy to fit. But most importantly, they will give you the finish you are looking for, making these rods a must-have!
Delivery is normally 3-4 working days, but can take 7-10 days during busy periods
If you have a question about delivery, or the fitting of these or any of our products, please feel free to call or email us. We have experts ready to answer your questions