Floor Transition Strips Uneven
The Premier Trims Floor Transition Strips Uneven is an ingenious door bar suitable for use on hard floor coverings such as laminate flooring, ceramic tiles and luxury vinyl tiles.
You can, however, use these floor transition strips on all types of hard floor coverings where you have a transition height change between 2mm and 9mm (have more than 9mm, try our Flooring Ramp)
These clever Transition Strips are self-adhesive
So no need to drill, just peel and stick!
This also makes them perfect for use where underfloor heating is installed
Our floor transition strips are made from solid brass and are hand finished in 10 stunning colours to suit your home perfectly
So, if you are looking for a high-end finish to your flooring, these are the trims for you!
Use for:
- Laminate to laminate
- Laminate to vinyl
- Laminate to LVT
- Laminate to engineered flooring
- Engineered flooring to engineered flooring
- Vinyl to vinyl
- LVT to LVT
- Ceramic tiles to ceramic tiles
- LVT to wood
- LVT to Ceramic tiles
- Stone to LVT
- Laminate to Stone
- Real wood to Stone
- Real wood to LVT
- Stone to vinyl
- Stone to stone
- Ceramic to ceramic
- Ceramic to LVT
- Ceramic to laminate
In fact, customers can use this self-adhesive flooring door bar for all the above and any combination of the above, the list of possible uses is endless!
The Clever Bit
Each of these Floor Transition Strips Uneven will accommodate two height differences as it is reversible (see images and video for details)
Choose from the following sizes
- 2-3mm
- 4-5mm
- 6-7mm
- 8-9mm
Other Size Options
Need more than 9mm? Try our Flooring Ramp which is available in 5 sizes from 10mm to 20mm
- Our choice of standard finishes is: Antique Brass, Antique Bronze, Brass, Satin Brass.
- Choice of specialised finishes: Brushed Chrome, Chrome, Pewter, Polished Nickel, Satin Nickel and Black.
- Choice of length: 90cm (36″), 180 (71″) and 270cm (106″)
Ordering And Delivery
Spend £75 for free delivery
For orders under £75 our delivery charge is £9.98, this is due to the fact that we use thick boxes and tubes to secure your trims, we also attached a timber batten to the longer parcels to help prevent them from damage, these precautions result in a slightly higher shipping price.
Delivery is normally 3-5 working days, however it can take 7-10 working day during busy periods
If the delivery date is critical, please contact us for an estimated delivery date.
Care and Maintenance
Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.
Satin Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.
Antique Bronze
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.
Antique Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.
Pewter
Remove spills immediately to limit corrosion with white vinegar. Use a polishing cloth occasionally, such as HG copper shine cloth, available from most DIY stores. Avoid contact with floor coverings.
Chrome, Brushed Chrome, Satin Nickel, Polished Nickel and Black
No maintenance required.
Michael Winch (verified owner) –
Efficient and responsive. Quality product