Carpet to Carpet Threshold
For use when a standard carpet to carpet transition cannot be used or if you prefer the look and finish of this trim.
NOTE. Please be aware that when using this trim for carpet to carpet your fitter may need extra gripper rods to correctly fit the trim
Manufactured from solid brass and hand-finished in a choice of 10 finishes, the premier trim carpet to carpet threshold is exactly as it sounds.
Premier quality and heavy-duty, a real quality carpet trim
So when you’re looking for something extra special to finish your flooring, these are definitely the trims for you!
This range also has a self-adhesive inlay strip to hide the screws after fixing, giving you an even smarter, cleaner finish!
Choose from 10 beautiful finishes, 3 widths and 3 lengths
- The 30mm wide trim should only be used on a thin carpet which has a level transition
- The 38mm wide carpet to carpet threshold is the standard size and can be used on level carpet joins as well as height differences of up to 6mm.
- The 55mm extra wide carpet to carpet threshold is perfect for bridging wider gaps and can be used on a height change of up to 8mm
These trims are screw-down, they can, therefore, be retrofitted after the carpets have been installed.
- Our choice of standard finishes is: Antique Brass, Antique Bronze, Brass, Satin Brass.
- Or choose from our Specialised finishes: Brushed Chrome, Chrome, Pewter, Polished Nickel, Satin Nickel and Black
- Choice of length:Â 90cm (36″), 180 (71″) and 270cm (106″)
- Choice of widths: 30mm, 38mm, 55mm
Once you have decided which finish, length and width you require, please make your selections from the drop-down menu above.
Fitting
The first video below gives you a brief overview of this range, the second video shows a fitting scenario of this trim
As you can see from the video, fitting is simple, but please bear in mind that these trims can be used on carpet to any hard floor and even hard floor to hard floor
Ordering And Delivery
Spend £75 for free delivery
For orders under £75 our delivery charge is £9.98, this is due to the fact that we use thick boxes and tubes to secure your trims, we also attached a timber batten to the longer parcels to help prevent them from damage, these precautions result in a slightly higher shipping price.
Delivery is normally 3-5 working days, however it can take 7-10 working day during busy periods
If the delivery date is critical, please contact us for an estimated delivery date.
Care and Maintenance
Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.
Satin Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth.
Antique Bronze
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.
Antique Brass
Remove spills immediately to limit corrosion with white vinegar. Brass will tarnish over time and we recommend a polishing cloth such as HG copper shine cloth available from most DIY stores. Avoid contact with floor coverings.
Should corrosion appear, we use this finishing pad, Mirka Total Finishing pad P1500 (grey). Rub the area to remove contamination and buff up with HG copper shine cloth. This may go down to the solid brass base however over time the ‘rubbed’ lighter area will tarnish/blend into the antique finish.
Pewter
Remove spills immediately to limit corrosion with white vinegar. Use a polishing cloth occasionally, such as HG copper shine cloth, available from most DIY stores. Avoid contact with floor coverings.
Chrome, Brushed Chrome, Satin Nickel, Polished Nickel and Black
No maintenance required.